{"id":9852,"date":"2026-08-18T17:00:06","date_gmt":"2026-08-18T09:00:06","guid":{"rendered":"https:\/\/meettfit.com\/?p=9852"},"modified":"2026-08-18T12:01:18","modified_gmt":"2026-08-18T04:01:18","slug":"how-is-pvc-flooring-bond-strength-tested-on-site","status":"publish","type":"post","link":"https:\/\/meettfit.com\/id\/blog-lantai-pvc\/bagaimana-cara-menguji-kekuatan-ikatan-lantai-pvc-di-lokasi\/","title":{"rendered":"Bagaimana Pengujian Kekuatan Ikatan Lantai PVC Dilakukan di Lokasi"},"content":{"rendered":"

Tidak ada nilai tarikan lepas yang bersifat universal dan berlaku untuk semua jenis lantai PVC. Kualitas ikatan biasanya diperiksa melalui evaluasi ikatan matras sebelum pemasangan dan, jika diperlukan, pemeriksaan pengelupasan atau pengangkatan setelah pemasangan. Pengujian kuantitatif harus hanya mengikuti metode dan kriteria penerimaan yang ditetapkan dalam spesifikasi proyek atau oleh produsen.<\/strong><\/p>\n

I’ve walked onto too many job sites where a floor looked perfect on install day, then started lifting three weeks later. That gap between "looks fine" and "is actually bonded" is why on-site checks exist. This guide is built for installers, flooring inspectors, general contractors, and facility managers who need to confirm a PVC floor is bonded before they sign off on the job. I’ll walk through the real standards that apply, the difference between pre- and post-installation testing, the tools involved, and how to fix a bond that fails.<\/p>\n

Obligasi yang tampak kokoh pada hari pertama pun bisa saja gagal di kemudian hari. Sebelum saya membahas metode pengujiannya, izinkan saya menjelaskan mengapa langkah ini sangat penting dalam setiap proyek.<\/p>\n

Mengapa Pengujian Daya Rekat Lantai PVC Penting?<\/h2>\n

Pengujian daya rekat dapat mendeteksi titik-titik lemah sebelum berubah menjadi gelembung, pengangkatan, atau bahkan penggantian lantai secara keseluruhan. Sebagian besar kegagalan daya rekat disebabkan oleh kelembapan, persiapan permukaan yang buruk, atau penggunaan perekat yang tidak tepat. Mendeteksi masalah ini sejak dini jauh lebih hemat biaya daripada memperbaikinya setelah lantai mulai digunakan.<\/strong><\/p>\n

Penyebab Umum Kegagalan Ikatan<\/h3>\n

Selama bertahun-tahun saya bekerja di bidang pemasangan lantai komersial, ada tiga masalah yang paling sering menyebabkan kegagalan perekat:<\/p>\n\n\n\n\n\n\n\n
Karena<\/th>\nApa yang Terjadi<\/th>\n<\/tr>\n<\/thead>\n
Kelembapan lapisan bawah lantai atau tingkat alkalinitas yang tinggi<\/td>\nLem mulai terlepas dari bagian bawah, lantai terangkat<\/td>\n<\/tr>\n
Debu, sisa semen, atau persiapan permukaan yang kurang baik<\/td>\nAdhesive can’t grip the substrate<\/td>\n<\/tr>\n
Pilihan perekat yang salah atau waktu pengeringan awal\/waktu perekat yang buruk<\/td>\nIkatan yang lemah atau tidak merata di seluruh lantai<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

A failed floor in an occupied commercial space means lost use of the area, tear-out labor, and sometimes a dispute over who’s responsible. A pre-installation check or a spot investigation costs a fraction of that. I treat it as cheap insurance, not an extra step.<\/p>\n

\"Seorang<\/p>\n

Pengujian memang penting, tetapi mengetahui standar mana yang sebenarnya berlaku juga tak kalah pentingnya. Di sinilah banyak konten tentang lantai di internet sering kali keliru.<\/p>\n

Apakah Ada Standar ASTM untuk Pengujian Kekuatan Ikatan Lantai PVC di Lokasi?<\/h2>\n

Ya, tetapi tidak ada satu pun standar yang mencakup seluruh aspeknya. Standar ASTM F3311 mengatur evaluasi daya rekat alas lantai sebelum pemasangan. Standar ASTM D6004 dan ASTM D903 mengatur pengujian geser dan pengelupasan perekat di laboratorium. Standar ASTM D4541 mengatur pengujian pelepasan portabel, tetapi standar ini disusun untuk bahan pelapis, bukan lantai elastis.<\/strong><\/p>\n

Menyesuaikan Setiap Standar dengan Tujuan Sebenarnya<\/h3>\n\n\n\n\n\n\n\n\n\n\n
Metode<\/th>\nTujuan Utama<\/th>\nDi lokasi?<\/th>\nKuantitatif?<\/th>\n<\/tr>\n<\/thead>\n
Evaluasi ikatan mat ASTM F3311<\/td>\nPemeriksaan kompatibilitas sebelum pemasangan<\/td>\nYa.<\/td>\nSebagian besar bersifat kualitatif<\/td>\n<\/tr>\n
Pemeriksaan pengelupasan atau pengangkatan di lapangan<\/td>\nMendiagnosis lantai yang sudah terpasang<\/td>\nYa.<\/td>\nTerkadang<\/td>\n<\/tr>\n
Penyelidikan lepasnya material yang spesifik untuk proyek<\/td>\nPenyelidikan kegagalan<\/td>\nYa.<\/td>\nYa, jika ditentukan dalam spesifikasi<\/td>\n<\/tr>\n
ASTM D6004<\/td>\nKekuatan geser perekat<\/td>\nSebagian besar dikendalikan di laboratorium<\/td>\nYa.<\/td>\n<\/tr>\n
ASTM D903<\/td>\nKekuatan lepas perekat<\/td>\nTerkendali di laboratorium<\/td>\nYa.<\/td>\n<\/tr>\n
ASTM D4541 \/ D7234<\/td>\nAdhesi pelepasan lapisan<\/td>\nBidang, namun dirancang khusus untuk pelapisan<\/td>\nYa.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

I want to be direct about something a lot of flooring articles get wrong: ASTM D4541 is a coating adhesion standard, not a dedicated acceptance standard for adhered PVC flooring. A pull-off tester can still be used for diagnostic investigation on a flooring assembly, but only when the project specification defines the procedure and acceptance criteria. Reporting a result as "an ASTM D4541 PVC flooring test" overstates what the standard actually covers. Same goes for D903, a peel principle can be adapted for a field check, but unless specimen prep, pull rate, angle, and equipment match the lab standard, the result shouldn’t be labeled a D903 test.<\/p>\n

Dengan mempertimbangkan standar yang tepat, pertanyaan berikutnya adalah soal waktu. Pemeriksaan obligasi terbagi menjadi dua kategori yang sangat berbeda.<\/p>\n

Pengujian Ikatan Sebelum Pemasangan vs. Setelah Pemasangan<\/h2>\n

Pengujian prapemasangan, sesuai dengan standar ASTM F3311, memastikan bahwa sistem lantai akan merekat dengan baik sebelum pekerjaan dimulai secara penuh. Pengujian pascapemasangan dilakukan untuk memeriksa kekuatan rekat setelah pemasangan selesai, biasanya karena telah muncul masalah atau spesifikasi mengharuskan verifikasi secara selektif.<\/strong><\/p>\n

Keduanya memiliki tujuan yang berbeda. Pengujian sebelum pemasangan mencegah terjadinya masalah. Pengujian setelah pemasangan mendiagnosis masalah tersebut. Rencana pengujian sambungan yang baik memanfaatkan keduanya, bukan hanya salah satunya.<\/p>\n

Bagaimana Cara Melakukan Uji Ikatan Mat Sebelum Pemasangan?<\/h2>\n

Uji ikatan mat, sesuai dengan ASTM F3311, dilakukan dengan memasang sepotong sampel kecil dari sistem lantai yang sebenarnya pada substrat asli, membiarkannya mengering, lalu mengevaluasi ikatan dan pola transfernya. Uji ini bertujuan untuk memastikan apakah permukaan beton, primer, lapisan dasar, dan perekat benar-benar kompatibel sebelum pemasangan lantai secara keseluruhan dilakukan.<\/strong><\/p>\n

Prosedur Pemasangan Karpet Langkah demi Langkah<\/h3>\n
    \n
  1. Pilihlah area yang mewakili dari lantai dasar, termasuk saluran drainase parit atau zona yang tidak biasa.<\/li>\n
  2. Siapkan substrat dengan cara yang sama seperti saat akan dipasang secara penuh.<\/li>\n
  3. Apply primer and adhesive following the manufacturer’s written instructions.<\/li>\n
  4. Pasanglah sepotong contoh lantai PVC yang sebenarnya.<\/li>\n
  5. Allow curing per each manufacturer’s open, curing, and drying time requirements.<\/li>\n
  6. Lepaskan sampel tersebut dan periksa proses pemindahan perekat serta kualitas ikatannya.<\/li>\n<\/ol>\n

    ASTM F3311 is explicit that this practice isn’t mandatory on every job. I use it most often when products from different manufacturers are being combined for the first time, or when the substrate condition is uncertain. Getting the compatibility check right at this stage prevents a much larger problem later.<\/p>\n

    Pemeriksaan ikatan karpet dilakukan sebelum lantai dipasang. Begitu lantai sudah terpasang dan ada yang tampak tidak beres, cara penanganannya pun berubah.<\/p>\n

    Bagaimana Cara Melakukan Uji Pengelupasan Lapangan Setelah Pemasangan?<\/h2>\n

    A field peel check cuts a narrow strip through the installed flooring, peels it back at a steady angle, and measures the force needed to separate it from the substrate. This isn’t a formal ASTM D903 test unless the specimen geometry, pull rate, and equipment match the lab standard, but the same peel principle applies.<\/strong><\/p>\n

    Pemeriksaan Lapisan Kulit Langkah demi Langkah<\/h3>\n
      \n
    1. Potonglah selembar lantai PVC dengan lebar 1 inci (25 mm).<\/li>\n
    2. Kupas bagian ujung pembuka sepanjang sekitar 2 inci.<\/li>\n
    3. Pasang penjepit pengukur gaya ke tab tersebut.<\/li>\n
    4. Tarik strip tersebut ke belakang dengan sudut dan kecepatan yang stabil.<\/li>\n
    5. Catat gaya yang diperlukan untuk melepaskan lantai dari substratnya.<\/li>\n
    6. Periksa dan ambil foto permukaan yang terbuka.<\/li>\n<\/ol>\n

      Metode ini bersifat merusak, jadi saya hanya melakukannya di area yang tidak krusial atau bagian yang sudah ditandai untuk diperbaiki.<\/p>\n

      Apakah Alat Uji Pull-Off Dapat Digunakan pada Lantai PVC?<\/h2>\n

      Ya, sebagai alat diagnostik, namun dengan keterbatasan. Alat uji tarik portabel dirancang untuk sistem pelapis, bukan untuk struktur lantai elastis berlapis-lapis. Pada sistem lantai, bidang terlemah bisa saja terletak beberapa lapisan di bawah permukaan, sehingga hasilnya perlu ditafsirkan dengan hati-hati.<\/strong><\/p>\n

      In a PVC flooring assembly, the layers stack up as PVC sheet or tile, adhesive, sometimes a primer or patch compound, then concrete. When I glue a dolly to the PVC surface and pull, the failure could happen at the epoxy-to-PVC interface, within the PVC itself, at the flooring adhesive, at the primer, or at the concrete surface. That’s useful information, but it’s an adapted diagnostic investigation, not a certified acceptance test, unless the project specification defines the exact procedure and pass\/fail criteria in advance.<\/p>\n

      \"Alat<\/p>\n

      Apa pun metode yang digunakan, alat yang tepat akan menentukan apakah tes tersebut bermanfaat atau hanya sia-sia.<\/p>\n

      Alat apa saja yang diperlukan untuk pengujian ikatan di lokasi?<\/h2>\n\n\n\n\n\n\n\n\n\n\n
      Alat<\/th>\nDigunakan Untuk<\/th>\n<\/tr>\n<\/thead>\n
      Alat penguji daya rekat tarik portabel<\/td>\nPenyelidikan diagnostik pull-off<\/td>\n<\/tr>\n
      Dolly atau stub logam<\/td>\nMemasang alat penguji lepas pada permukaan<\/td>\n<\/tr>\n
      Epoxy yang cepat mengeras<\/td>\nMemasang dolly ke lantai<\/td>\n<\/tr>\n
      Pengukur gaya genggam atau timbangan pegas<\/td>\nPemeriksaan pengelupasan di lapangan<\/td>\n<\/tr>\n
      Pisau pemotong dan penggaris logam<\/td>\nMemotong strip uji<\/td>\n<\/tr>\n
      Pengukur kelembaban<\/td>\nMemastikan tingkat kelembapan lantai dasar sebelum pengujian<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      Kapan Kekuatan Ikatan Harus Diuji?<\/h2>\n

      Testing timing depends on the adhesive and flooring manufacturer’s written instructions, not a fixed number of hours. Depending on the system, full cure before a destructive assessment might be 24, 48, 72 hours, or longer.<\/strong><\/p>\n

      I always check the adhesive’s technical data sheet before scheduling a test. Testing too early, before the adhesive reaches its stated cure point, gives a misleadingly low reading. The same goes for room conditions. I test under the same temperature and humidity range the manufacturer specifies for that product, since this varies between adhesive systems.<\/p>\n

      Berapa Banyak Lokasi Ujian yang Harus Digunakan?<\/h2>\n

      Jumlah lokasi pengujian yang tepat bergantung pada spesifikasi proyek, namun secara umum saya mempertimbangkan:<\/p>\n

        \n
      • Perimeter area pemasangan, di mana bagian tepinya lebih rentan terangkat.<\/li>\n
      • Titik tengah dari kawasan terbuka yang luas.<\/li>\n
      • Setiap lokasi yang dilaporkan oleh para teknisi sebagai titik masalah selama pelaksanaan pekerjaan.<\/li>\n
      • Zona-zona di mana jenis substrat atau perekatnya berubah.<\/li>\n<\/ul>\n

        Dengan mencakup berbagai lokasi, bukan hanya satu tempat saja, kita bisa mendapatkan gambaran yang jauh lebih akurat mengenai keseluruhan instalasi.<\/p>\n

        Berapa Nilai Kekuatan Ikatan Lantai PVC yang Dianggap Layak?<\/h2>\n

        Tidak ada nilai PSI, MPa, atau N\/mm tunggal yang berlaku untuk setiap sistem lantai PVC. Kekuatan ikatan yang dapat diterima ditentukan oleh produsen lantai, produsen perekat, spesifikasi proyek, atau model uji yang telah disetujui, bukan angka standar industri yang berlaku umum.<\/strong><\/p>\n

        This is one of the most common questions I get, and it’s worth being clear about. Different adhesive chemistries, different PVC constructions, and different substrate types all carry different acceptance thresholds. Before I run any test, I pull the adhesive manufacturer’s technical data sheet and the project specification to find the actual target. Comparing a field reading against the wrong benchmark leads to bad decisions either way, rejecting a bond that’s actually fine, or approving one that isn’t.<\/p>\n

        Bagaimana Anda Menafsirkan Bidang Patahan?<\/h2>\n

        Bagian lantai yang terlepas selama pengujian memberi saya informasi lebih banyak daripada sekadar angka gaya saja. Kerusakan tersebut bisa terjadi di dalam bahan PVC, pada antarmuka perekat, di dalam perekat itu sendiri, pada lapisan primer, atau di dalam beton, dan masing-masing mengindikasikan penyebab utama yang berbeda.<\/strong><\/p>\n

        Membaca Bidang Kegagalan<\/h3>\n\n\n\n\n\n\n\n\n\n
        Lokasi Kerusakan<\/th>\nKemungkinan Penyebab<\/th>\n<\/tr>\n<\/thead>\n
        Antarmuka PVC-ke-perekat<\/td>\nKontaminasi permukaan, waktu pembukaan yang salah, perekat yang tidak cocok<\/td>\n<\/tr>\n
        Di dalam bahan perekat (kerusakan kohesif)<\/td>\nPerekat yang belum cukup mengering, masuknya uap air, pencampuran yang tidak tepat<\/td>\n<\/tr>\n
        Antarmuka perekat-substrat<\/td>\nDebu, sisa semen, atau masalah lapisan dasar<\/td>\n<\/tr>\n
        Di dalam lapisan dasar atau campuran tambalan<\/td>\nKelemahan telah bergeser ke lapisan itu<\/td>\n<\/tr>\n
        Di dalam permukaan beton<\/td>\nAdhesive is stronger than the substrate’s tensile strength<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

        A high force reading with the PVC tearing before the bond gives way is generally a strong result. But I don’t treat that as automatic proof the whole system is sound; it only confirms that spot. Reading the failure plane correctly, and comparing it against the manufacturer’s criteria, is what separates a useful test from a number on a page.<\/p>\n

        \"Pemeriksaan<\/p>\n

        Memahami bidang patahan akan langsung mengarah pada perbaikan penyebabnya.<\/p>\n

        Apa Penyebab Rendahnya Kekuatan Ikatan Lantai PVC?<\/h2>\n\n\n\n\n\n\n\n\n
        Masalah<\/th>\nMemperbaiki<\/th>\n<\/tr>\n<\/thead>\n
        Kelembapan atau nilai pH yang tinggi pada lapisan bawah lantai<\/td>\nPasang sistem pengendalian kelembapan yang sesuai dengan hasil pengukuran, sesuai dengan uji ASTM F2170 atau F1869<\/td>\n<\/tr>\n
        Substrat yang berdebu, rapuh, atau berpori<\/td>\nBersihkan secara menyeluruh, aplikasikan primer yang sesuai, atau gunakan bahan perata otomatis<\/td>\n<\/tr>\n
        Ukuran lekukan sekop yang salah atau cakupan perekat yang tidak tepat<\/td>\nMatch trowel size to the adhesive manufacturer’s technical data sheet<\/td>\n<\/tr>\n
        Penggulungan yang tidak memadai<\/td>\nGulirkan beban di atas lantai sesuai dengan berat dan urutan yang ditentukan oleh produsen<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

        I’ve seen inadequate rolling cause more failed bonds than people expect. Skipping a proper rolling pass leaves air pockets under the flooring, even when the adhesive itself is fine. Commercial sheet and tile systems commonly call for a heavy sectional roller, but the exact weight and pass count should come from the adhesive manufacturer, not a generic rule.<\/p>\n

        Bagaimana Cara Mendokumentasikan Uji Ikatan di Lokasi?<\/h2>\n
          \n
        1. Catat lokasi pengujian dan metode yang digunakan.<\/li>\n
        2. Catat kondisi lingkungan pada saat pengujian.<\/li>\n
        3. Catat nilai gaya atau tekanan yang tepat, jika bersifat kuantitatif.<\/li>\n
        4. Ambil foto permukaan yang rusak.<\/li>\n
        5. Identifikasi bidang patahan dan kemungkinan penyebabnya.<\/li>\n
        6. Compile everything into a formal test report referencing the manufacturer’s criteria.<\/li>\n<\/ol>\n

          Saya tidak pernah mengabaikan dokumentasi. Sebuah laporan yang dilengkapi foto, hasil pengukuran yang tepat, dan kriteria penerimaan yang dirujuk akan melindungi semua pihak yang terlibat dalam proyek tersebut jika nantinya timbul sengketa.<\/p>\n

          Pertanyaan yang Sering Diajukan<\/h2>\n

          Berapa lama saya harus menunggu setelah memasang lantai PVC untuk menguji kekuatan ikatannya?<\/strong>
          \nThis depends on the adhesive manufacturer’s written cure time, which can range from 24 to 72 hours or longer depending on the product.<\/p>\n

          Apakah saya bisa menguji kekuatan ikatan tanpa merusak lantai yang sudah jadi?<\/strong>
          \nYa, melalui evaluasi ikatan alas lantai sebelum pemasangan sesuai dengan standar ASTM F3311. Pengujian lantai yang sudah terpasang dengan metode uji pengelupasan atau penarikan bersifat merusak, jadi saya membatasi pengujian tersebut hanya pada area-area yang tidak kritis.<\/p>\n

          Apa perbedaan antara pengujian di laboratorium dan pengujian di lokasi?<\/strong>
          \nUji laboratorium seperti ASTM D6004 atau D903 dilakukan dengan persiapan spesimen dan peralatan yang terkendali. Pemeriksaan di lokasi mencerminkan kondisi pemasangan yang sebenarnya, namun hasilnya harus ditafsirkan sebagai alat diagnostik, bukan sebagai pengganti standar laboratorium, kecuali jika prosedur yang tepat diikuti.<\/p>\n

          Siapa yang secara hukum bertanggung jawab untuk melakukan uji kekuatan ikatan di lokasi proyek komersial?<\/strong>
          \nThis depends on the contract, but it’s usually the flooring contractor or a third-party inspector engaged by the general contractor or facility manager.<\/p>\n

          Kesimpulan<\/h2>\n

          Matching the right test to the right stage, mat bond before installation, diagnostic checks after, prevents costly rework and keeps every claim backed by the manufacturer’s actual criteria.<\/p>\n

          If you’re planning a PVC flooring installation and want a second opinion on your bond testing plan, adhesive selection, or how to read a failure plane, send me a message. I’m happy to walk through your specific project details.<\/p>","protected":false},"excerpt":{"rendered":"

          There is no single universal field pull-off number for PVC flooring. Bond quality is usually checked through a pre-installation mat bond evaluation and, when needed, a post-installation peel or lift check. Quantitative testing should only follow the method and acceptance criteria set by the project specification or manufacturer. I’ve walked onto too many job sites…<\/p>","protected":false},"author":4,"featured_media":9861,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[21],"tags":[],"class_list":["post-9852","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-pvc-floor-blog"],"yoast_head":"\nHow Is PVC Flooring Bond Strength Tested On-Site - MF FLOOR<\/title>\n<meta name=\"description\" content=\"No universal PSI value applies to PVC flooring bond tests. Learn the real ASTM standards, pre- vs post-install testing methods, and how to read results.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/meettfit.com\/id\/blog-lantai-pvc\/bagaimana-cara-menguji-kekuatan-ikatan-lantai-pvc-di-lokasi\/\" \/>\n<meta property=\"og:locale\" content=\"id_ID\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How Is PVC Flooring Bond Strength Tested On-Site - MF FLOOR\" \/>\n<meta property=\"og:description\" content=\"No universal PSI value applies to PVC flooring bond tests. Learn the real ASTM standards, pre- vs post-install testing methods, and how to read results.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/meettfit.com\/id\/blog-lantai-pvc\/bagaimana-cara-menguji-kekuatan-ikatan-lantai-pvc-di-lokasi\/\" \/>\n<meta property=\"og:site_name\" content=\"MF FLOOR\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=100079773047357\" \/>\n<meta property=\"article:published_time\" content=\"2026-08-18T09:00:06+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Leo\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Ditulis oleh\" \/>\n\t<meta name=\"twitter:data1\" content=\"Leo\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimasi waktu membaca\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 menit\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/\"},\"author\":{\"name\":\"Leo\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef\"},\"headline\":\"How Is PVC Flooring Bond Strength Tested On-Site\",\"datePublished\":\"2026-08-18T09:00:06+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/\"},\"wordCount\":2187,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/meettfit.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg\",\"articleSection\":[\"Vinyl Flooring Insights\"],\"inLanguage\":\"id\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/\",\"url\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/\",\"name\":\"How Is PVC Flooring Bond Strength Tested On-Site - MF FLOOR\",\"isPartOf\":{\"@id\":\"https:\/\/meettfit.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg\",\"datePublished\":\"2026-08-18T09:00:06+00:00\",\"description\":\"No universal PSI value applies to PVC flooring bond tests. Learn the real ASTM standards, pre- vs post-install testing methods, and how to read results.\",\"breadcrumb\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#breadcrumb\"},\"inLanguage\":\"id\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"id\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage\",\"url\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg\",\"contentUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg\",\"width\":800,\"height\":600,\"caption\":\"PVC Flooring (2)\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/meettfit.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How Is PVC Flooring Bond Strength Tested On-Site\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/meettfit.com\/#website\",\"url\":\"https:\/\/meettfit.com\/\",\"name\":\"MF FLOOR\",\"description\":\"fitness and sports floor China factory\",\"publisher\":{\"@id\":\"https:\/\/meettfit.com\/#organization\"},\"alternateName\":\"MF FLOOR\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/meettfit.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"id\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/meettfit.com\/#organization\",\"name\":\"MF FLOOR\",\"alternateName\":\"MF FLOOR\",\"url\":\"https:\/\/meettfit.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"id\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png\",\"contentUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png\",\"width\":512,\"height\":512,\"caption\":\"MF FLOOR\"},\"image\":{\"@id\":\"https:\/\/meettfit.com\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/profile.php?id=100079773047357\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef\",\"name\":\"Leo\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"id\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g\",\"caption\":\"Leo\"},\"url\":\"https:\/\/meettfit.com\/id\/author\/1659230944qq-com\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How Is PVC Flooring Bond Strength Tested On-Site - MF FLOOR","description":"No universal PSI value applies to PVC flooring bond tests. Learn the real ASTM standards, pre- vs post-install testing methods, and how to read results.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/meettfit.com\/id\/blog-lantai-pvc\/bagaimana-cara-menguji-kekuatan-ikatan-lantai-pvc-di-lokasi\/","og_locale":"id_ID","og_type":"article","og_title":"How Is PVC Flooring Bond Strength Tested On-Site - MF FLOOR","og_description":"No universal PSI value applies to PVC flooring bond tests. Learn the real ASTM standards, pre- vs post-install testing methods, and how to read results.","og_url":"https:\/\/meettfit.com\/id\/blog-lantai-pvc\/bagaimana-cara-menguji-kekuatan-ikatan-lantai-pvc-di-lokasi\/","og_site_name":"MF FLOOR","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=100079773047357","article_published_time":"2026-08-18T09:00:06+00:00","og_image":[{"width":800,"height":600,"url":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg","type":"image\/jpeg"}],"author":"Leo","twitter_card":"summary_large_image","twitter_misc":{"Ditulis oleh":"Leo","Estimasi waktu membaca":"11 menit"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#article","isPartOf":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/"},"author":{"name":"Leo","@id":"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef"},"headline":"How Is PVC Flooring Bond Strength Tested On-Site","datePublished":"2026-08-18T09:00:06+00:00","mainEntityOfPage":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/"},"wordCount":2187,"commentCount":0,"publisher":{"@id":"https:\/\/meettfit.com\/#organization"},"image":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage"},"thumbnailUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg","articleSection":["Vinyl Flooring Insights"],"inLanguage":"id","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/","url":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/","name":"How Is PVC Flooring Bond Strength Tested On-Site - MF FLOOR","isPartOf":{"@id":"https:\/\/meettfit.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage"},"image":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage"},"thumbnailUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg","datePublished":"2026-08-18T09:00:06+00:00","description":"No universal PSI value applies to PVC flooring bond tests. Learn the real ASTM standards, pre- vs post-install testing methods, and how to read results.","breadcrumb":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#breadcrumb"},"inLanguage":"id","potentialAction":[{"@type":"ReadAction","target":["https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/"]}]},{"@type":"ImageObject","inLanguage":"id","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#primaryimage","url":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg","contentUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/08\/PVC-Flooring-2-11.jpg","width":800,"height":600,"caption":"PVC Flooring (2)"},{"@type":"BreadcrumbList","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-pvc-flooring-bond-strength-tested-on-site\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/meettfit.com\/"},{"@type":"ListItem","position":2,"name":"How Is PVC Flooring Bond Strength Tested On-Site"}]},{"@type":"WebSite","@id":"https:\/\/meettfit.com\/#website","url":"https:\/\/meettfit.com\/","name":"MF FLOOR","description":"fitness and sports floor China factory","publisher":{"@id":"https:\/\/meettfit.com\/#organization"},"alternateName":"MF FLOOR","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/meettfit.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"id"},{"@type":"Organization","@id":"https:\/\/meettfit.com\/#organization","name":"MF FLOOR","alternateName":"MF FLOOR","url":"https:\/\/meettfit.com\/","logo":{"@type":"ImageObject","inLanguage":"id","@id":"https:\/\/meettfit.com\/#\/schema\/logo\/image\/","url":"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png","contentUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png","width":512,"height":512,"caption":"MF FLOOR"},"image":{"@id":"https:\/\/meettfit.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=100079773047357"]},{"@type":"Person","@id":"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef","name":"Leo","image":{"@type":"ImageObject","inLanguage":"id","@id":"https:\/\/meettfit.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g","caption":"Leo"},"url":"https:\/\/meettfit.com\/id\/author\/1659230944qq-com\/"}]}},"_links":{"self":[{"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/posts\/9852","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/comments?post=9852"}],"version-history":[{"count":1,"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/posts\/9852\/revisions"}],"predecessor-version":[{"id":9866,"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/posts\/9852\/revisions\/9866"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/media\/9861"}],"wp:attachment":[{"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/media?parent=9852"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/categories?post=9852"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/meettfit.com\/id\/wp-json\/wp\/v2\/tags?post=9852"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}