{"id":10764,"date":"2026-10-31T15:00:30","date_gmt":"2026-10-31T07:00:30","guid":{"rendered":"https:\/\/meettfit.com\/?p=10764"},"modified":"2026-10-31T11:49:59","modified_gmt":"2026-10-31T03:49:59","slug":"how-is-batch-resistance-sampled-for-esd-vinyl-flooring","status":"publish","type":"post","link":"https:\/\/meettfit.com\/ar\/%d9%85%d8%af%d9%88%d9%86%d8%a9-%d8%a7%d9%84%d8%a3%d8%b1%d8%b6%d9%8a%d8%a7%d8%aa-%d8%a7%d9%84%d8%a8%d9%84%d8%a7%d8%b3%d8%aa%d9%8a%d9%83%d9%8a%d8%a9\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/","title":{"rendered":"How Is Batch Resistance Sampled for ESD Vinyl Flooring"},"content":{"rendered":"

Batch resistance sampling is a manufacturer’s quality plan. It defines the lot, sets when and where specimens are taken, and states the acceptance rules. The resistance test itself follows a chosen standard method. The standard does not set the lot size or sample count for you.<\/strong><\/p>\n

Many articles list ASTM F150, ANSI\/ESD STM7.1, and IEC 61340-4-1 as if they were a sampling plan. They are test methods. They tell you how to measure resistance. How many lots to test, how many specimens to pull, and when to release or hold a lot is usually set by the factory’s quality plan or by the customer’s technical agreement.<\/p>\n

This guide keeps those two layers apart. It follows the order a factory works in: production sampling, laboratory measurement, then judgment and release. Where no standard sets a rule, I say so.<\/p>\n

First, we need to separate two tests that people often mix up.<\/p>\n

Is Batch Sampling the Same as Product Qualification Testing?<\/h2>\n

No. Product qualification shows that a flooring design can meet its resistance requirements. Batch sampling checks that each production lot stays consistent with that qualified product. They have different goals, so they should not share one procedure.<\/strong><\/p>\n

Qualification testing is usually done once for a product or system, and again after a major change in material or process. It may use a full specimen system, such as the flooring with its adhesive and grounding materials, and it may cover more than one environmental condition. ANSI\/ESD STM7.1, for example, separates product evaluation from installed-floor acceptance.<\/p>\n

Batch testing is a routine check. It is shorter and happens every lot. Its job is to catch drift in raw material, mixing, or process settings.<\/p>\n

Qualification vs. Batch Testing<\/h3>\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0628\u0646\u062f<\/th>\nProduct Qualification<\/th>\nRoutine Batch Testing<\/th>\n<\/tr>\n<\/thead>\n
\u0627\u0644\u0647\u062f\u0641<\/td>\nProve the product design can meet requirements<\/td>\nConfirm each lot matches the qualified product<\/td>\n<\/tr>\n
\u0627\u0644\u062a\u0631\u062f\u062f<\/td>\nOnce, or after major changes<\/td>\nEvery lot, or as the quality plan says<\/td>\n<\/tr>\n
\u0646\u0637\u0627\u0642<\/td>\nOften a full specimen system, several conditions<\/td>\nDefined in the factory quality plan<\/td>\n<\/tr>\n
Rules come from<\/td>\nThe selected test standard and customer spec<\/td>\nThe quality plan and customer agreement<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

A routine batch check should not be presented as full qualification. A buyer should ask which one a report shows.<\/p>\n

With that split clear, the next question is what counts as a "batch."<\/p>\n

How Is a Production Lot Defined and Traced?<\/h2>\n

A lot is a group of product that shares the same key production conditions. Most factories define it by raw material lot, production line, run time, or output quantity. No standard sets one definition for every plant, so it should be written in the quality plan.<\/strong><\/p>\n

The lot definition decides what a test result stands for. If two raw material lots go into one "batch," one result can hide a real difference. A good definition links the result to the main sources of variation in the process.<\/p>\n

Common Lot Definitions<\/h3>\n\n\n\n\n\n\n\n\n
Basis<\/th>\nWhat It Controls<\/th>\n\u0627\u0644\u062d\u062f \u0627\u0644\u0623\u0642\u0635\u0649<\/th>\n<\/tr>\n<\/thead>\n
Raw material lot<\/td>\nVariation from additives and resin<\/td>\nDoes not capture process changes alone<\/td>\n<\/tr>\n
Production line and run<\/td>\nProcess settings and equipment<\/td>\nLong runs may need extra sampling<\/td>\n<\/tr>\n
Time or shift<\/td>\nEasy traceability<\/td>\nMay cross material changes<\/td>\n<\/tr>\n
Output quantity<\/td>\nClear size limit<\/td>\nDoes not reflect process events<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Many plants combine two or more of these. Whatever the rule is, each specimen needs a label that links it to the lot, the line, the date, and the position in the run. Without this, a failed result cannot be traced back to a cause.<\/p>\n

\"Lot<\/p>\n

Once the lot is defined, the plan must say when samples are taken.<\/p>\n

When and Where Are Samples Taken During Production?<\/h2>\n

Samples are taken at points that can show process change. Common choices are the start, middle, and end of a run, and after any change in material, equipment, or settings. This is a factory practice, not a rule every standard requires.<\/strong><\/p>\n

Resistance in ESD vinyl depends on how the conductive network forms in the vinyl matrix. Mixer wear, temperature shifts, and a new raw material lot can all change it. So sampling should follow those events.<\/p>\n

Taking samples at the start, middle, and end of a continuous run is a way to cover change over time. It works well for long runs. It is less useful if the process changes at a point between those positions, so a plan should also call for a sample after known change events.<\/p>\n

Roll and sheet product and tile product may not use the same positions. Rolls can vary across the width and along the length. Tiles are cut from larger sheets, so the sampling plan should say which position in the sheet the specimen represents. Each factory should write this down for its own product form.<\/p>\n

The next question is how many specimens to pull from those points.<\/p>\n

How Many Samples Are Tested per Lot?<\/h2>\n

There is no universal sample count. It comes from the manufacturer’s quality plan, the test method, and the customer’s requirements. A sound plan states its statistical basis and risk level, and it is written down before testing starts.<\/strong><\/p>\n

Be careful with any article or supplier that quotes a fixed number, such as "three tiles per lot," without a source. It is true that a stable process with good history may justify lighter sampling. But that is a decision that needs a statistical basis, an agreed risk level, and often customer approval. It is not a rule of thumb.<\/p>\n

What a Sampling Plan Should Document<\/h3>\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0628\u0646\u062f<\/th>\n\u0645\u0627 \u0623\u0647\u0645\u064a\u0629 \u0630\u0644\u0643<\/th>\n<\/tr>\n<\/thead>\n
Number of specimens per lot<\/td>\nSets the amount of evidence<\/td>\n<\/tr>\n
Sampling locations in the run<\/td>\nShows what variation is covered<\/td>\n<\/tr>\n
Measurement points per specimen<\/td>\nSets how many readings make a result<\/td>\n<\/tr>\n
Basis for the plan<\/td>\nShows the risk level and reasoning<\/td>\n<\/tr>\n
Acceptance criteria<\/td>\nDefines pass, hold, and reject<\/td>\n<\/tr>\n
Rules for process or material changes<\/td>\nTriggers extra sampling<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Some test methods set the specimen size and the number of measurement points. Those items must follow the method. The number of specimens per lot is usually the plan’s decision.<\/p>\n

After sampling, the lab has to measure the specimens in a controlled way.<\/p>\n

How Is Resistance Measured in the Laboratory?<\/h2>\n

The lab chooses a test method based on the product form and the customer’s specification. It then follows that method for specimen preparation, conditioning, electrodes, test voltage, reading time, and measurement layout. Only the method can set these items.<\/strong><\/p>\n

Choosing a method is not a matter of preference. It depends on the product (tile or sheet), the purpose (qualification, routine batch check, or installed acceptance), the region, and what the contract names. ASTM F150, ANSI\/ESD STM7.1, and IEC 61340-4-1 differ in electrode setup, layout, and how results are reported. A contract should name the method and the edition.<\/p>\n

What the Method Controls vs. What the Plan Controls<\/h3>\n\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0628\u0646\u062f<\/th>\nSet By<\/th>\n<\/tr>\n<\/thead>\n
Specimen size and preparation<\/td>\n\u0637\u0631\u064a\u0642\u0629 \u0627\u0644\u0627\u062e\u062a\u0628\u0627\u0631<\/td>\n<\/tr>\n
Conditioning temperature, humidity, and time<\/td>\n\u0637\u0631\u064a\u0642\u0629 \u0627\u0644\u0627\u062e\u062a\u0628\u0627\u0631<\/td>\n<\/tr>\n
Electrode type and weight<\/td>\n\u0637\u0631\u064a\u0642\u0629 \u0627\u0644\u0627\u062e\u062a\u0628\u0627\u0631<\/td>\n<\/tr>\n
Test voltage and reading time<\/td>\n\u0637\u0631\u064a\u0642\u0629 \u0627\u0644\u0627\u062e\u062a\u0628\u0627\u0631<\/td>\n<\/tr>\n
Measurement layout<\/td>\n\u0637\u0631\u064a\u0642\u0629 \u0627\u0644\u0627\u062e\u062a\u0628\u0627\u0631<\/td>\n<\/tr>\n
Number of specimens per lot<\/td>\nQuality plan or contract<\/td>\n<\/tr>\n
Acceptance limits for release<\/td>\nProduct spec, contract, or quality plan<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Conditioning is a good example of why this matters. A single "23\u00b0C and 50% RH" is not the full picture. ANSI\/ESD STM7.1 laboratory qualification, for example, includes both low and moderate humidity conditions, and each has its own tolerance and conditioning time. A routine factory check may use a smaller set of conditions if its procedure says so, but it must record the conditions it used.<\/p>\n

Types of Resistance Measurements<\/h3>\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0642\u064a\u0627\u0633<\/th>\n\u0645\u0627 \u0627\u0644\u0630\u064a \u064a\u0638\u0647\u0631\u0647 \u0630\u0644\u0643<\/th>\n<\/tr>\n<\/thead>\n
Point-to-point (Rpp)<\/td>\nResistance across the surface between two electrodes<\/td>\n<\/tr>\n
Resistance to groundable point (Rgp)<\/td>\nPath from the surface to a groundable point on a lab specimen<\/td>\n<\/tr>\n
Resistance to ground (Rg)<\/td>\nPath from an installed floor surface to the ground reference<\/td>\n<\/tr>\n
Vertical resistance<\/td>\nResistance through the material thickness, used in some IEC methods<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Lab specimens and installed floors use different connections, so the setup must match the method.<\/p>\n

\"Technician<\/p>\n

Once readings are taken, the lot has to be judged.<\/p>\n

How Are Results Judged and Lots Released?<\/h2>\n

Release follows acceptance rules that were set before testing. These rules should define the limits, the statistic used, and what happens when one result is out of range. A good average does not cancel a bad individual result.<\/strong><\/p>\n

An average alone is not a release rule. Resistance data can span several orders of magnitude, so a plain arithmetic mean can mislead. Some methods define how to calculate the average, and IEC 61340-4-1 is one that does. Always follow the method.<\/p>\n

What a Clear Release Rule Includes<\/h3>\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0639\u0646\u0635\u0631<\/th>\nWhat Should Be Written<\/th>\n<\/tr>\n<\/thead>\n
Resistance limits<\/td>\nMinimum and maximum for the product class and project<\/td>\n<\/tr>\n
Evaluation statistic<\/td>\nWhich values are used and how they are calculated<\/td>\n<\/tr>\n
Single out-of-range result<\/td>\nHow it is recorded and investigated<\/td>\n<\/tr>\n
Retest conditions<\/td>\nWhen a retest is allowed and how many<\/td>\n<\/tr>\n
Extra sampling<\/td>\nWhen more specimens are pulled<\/td>\n<\/tr>\n
Release, hold, or reject<\/td>\nWho decides and on what evidence<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The limits themselves should come from the product specification or the contract. They depend on the standard, the measurement setup, and the project. Conductive and static dissipative products are often described by different resistance ranges, but two results are comparable only when the test setup is comparable.<\/p>\n

Also keep electrical safety separate. Resistance limits are not a full safety check. Safety depends on grounding, equipment hazards, and local rules, and it needs its own review.<\/p>\n

Not every failed reading means the same thing, so the plan must say how to tell them apart.<\/p>\n

What Is the Difference Between a Product Failure, an Invalid Test, and a Retest Result?<\/h2>\n

A product failure means a valid test shows the lot is out of limits. An invalid test means the test did not follow the method or conditions, so the result cannot be used. A retest result is a new result gathered under a written rule. Each needs a different action.<\/strong><\/p>\n

Mixing these up causes two kinds of mistakes. One is rejecting good product because of a test error. The other is retesting again and again until a number passes. Both damage trust in the data.<\/p>\n

How to Tell Them Apart<\/h3>\n\n\n\n\n\n\n\n
Case<\/th>\nTypical Evidence<\/th>\n\u0627\u0644\u0625\u062c\u0631\u0627\u0621<\/th>\n<\/tr>\n<\/thead>\n
Product failure<\/td>\nValid setup, in-spec conditions, result outside limits<\/td>\nHold the lot, investigate cause, decide release, rework, or reject<\/td>\n<\/tr>\n
Invalid test<\/td>\nOut-of-range conditions, worn pads, dirty surface, calibration issue<\/td>\nRecord why it is invalid, fix the cause, repeat the test under the method<\/td>\n<\/tr>\n
Retest result<\/td>\nDone under a written retest rule<\/td>\nEvaluate with the original result as the plan states<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

A written plan should say how many retests are allowed and how all results are combined. It should also keep the original result in the record.<\/p>\n

Reports are where all of this becomes visible to the buyer.<\/p>\n

How Can Buyers Check a Factory Test Report?<\/h2>\n

Check that the report shows the lot number, test method and edition, conditions, sample count, measurement points, actual readings, and equipment calibration. Then ask how the lot and the sample count were decided.<\/strong><\/p>\n

A "pass" stamp tells you very little. The details behind it tell you what the pass means.<\/p>\n

What to Look for in a Report<\/h3>\n
    \n
  • A lot number that matches your order<\/li>\n
  • The test method and its edition<\/li>\n
  • Temperature, humidity, and conditioning time<\/li>\n
  • The number of specimens and where they came from<\/li>\n
  • The number of measurement points per specimen<\/li>\n
  • Actual resistance values, not only "pass"<\/li>\n
  • Equipment ID and calibration date<\/li>\n
  • Whether the result is routine batch testing or qualification testing<\/li>\n<\/ul>\n

    Questions to Ask Your Supplier<\/h3>\n\n\n\n\n\n\n\n\n\n
    \u0633\u0624\u0627\u0644<\/th>\nA Good Answer<\/th>\n<\/tr>\n<\/thead>\n
    How do you define a lot?<\/td>\nA written rule tied to raw material and production<\/td>\n<\/tr>\n
    How was your sample count decided?<\/td>\nA documented plan with a stated basis<\/td>\n<\/tr>\n
    What happens when one result is out of range?<\/td>\nA written hold, investigation, and retest rule<\/td>\n<\/tr>\n
    How do you tell an invalid test from a real failure?<\/td>\nClear criteria and records<\/td>\n<\/tr>\n
    Can I see calibration records?<\/td>\nDated and traceable records<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    When goods arrive, you can run spot checks on tiles from different pallets. Use the same method and similar conditions, and keep your records. If your readings differ a lot from the report, share your conditions with the supplier right away.<\/p>\n

    Even a strong report leaves one question open.<\/p>\n

    Does a Factory Pass Guarantee Installed-Floor Performance?<\/h2>\n

    No. A lot can pass factory testing and still fail on site. Conductive adhesive, copper tape, grounding connections, and site conditions all affect the installed floor, so installed-floor testing is a separate step.<\/strong><\/p>\n

    Factory batch testing shows that the material is consistent with its qualified product. Installed-floor testing shows that the finished system works in place. The line between them is not always sharp. Product qualification may already use a full specimen system, but it is still done in a lab under set conditions, not on your floor.<\/p>\n

    What Each Test Tells You<\/h3>\n\n\n\n\n\n\n\n\n
    \u0627\u062e\u062a\u0628\u0627\u0631<\/th>\n\u0645\u0627 \u0627\u0644\u0630\u064a \u064a\u062e\u0628\u0631\u0643 \u0628\u0647 \u0630\u0644\u0643<\/th>\n<\/tr>\n<\/thead>\n
    Qualification testing<\/td>\nThe product or system design can meet requirements under test conditions<\/td>\n<\/tr>\n
    Routine batch testing<\/td>\nThe lot is consistent with the qualified product<\/td>\n<\/tr>\n
    Installed-floor testing<\/td>\nThe finished floor, adhesive, and grounding work on site<\/td>\n<\/tr>\n
    Footwear and floor system evaluation<\/td>\nPersonnel grounding results where required, such as under ANSI\/ESD STM97.1 and STM97.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    Put installed-floor tests in the project schedule and in the contract. Name who performs them, which method applies, and what limits apply.<\/p>\n

    \"Installed<\/p>\n

    \u0627\u0644\u062e\u0627\u062a\u0645\u0629<\/h2>\n

    Batch sampling lowers risk but does not remove it, so write the lot rule, sample plan, limits, and installed-floor tests into your contract.<\/p>\n

    \u0646\u0628\u0630\u0629 \u0639\u0646 \u0627\u0644\u0645\u0624\u0644\u0641<\/strong> I work in quality control at an ESD vinyl flooring manufacturer. My work covers custom and bulk production, resistance testing, and material selection for electronics, cleanroom, and healthcare projects.<\/p>\n

    Need help writing an ESD flooring specification or a batch test plan? Send me a private message (DM me). Tell me your application and the standard you use, and I will share practical advice.<\/strong><\/p>","protected":false},"excerpt":{"rendered":"

    Batch resistance sampling is a manufacturer’s quality plan. It defines the lot, sets when and where specimens are taken, and states the acceptance rules. The resistance test itself follows a chosen standard method. The standard does not set the lot size or sample count for you. Many articles list ASTM F150, ANSI\/ESD STM7.1, and IEC…<\/p>","protected":false},"author":4,"featured_media":10772,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[21],"tags":[],"class_list":["post-10764","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-pvc-floor-blog"],"yoast_head":"\nHow Is Batch Resistance Sampled for ESD Vinyl Flooring - MF FLOOR<\/title>\n<meta name=\"description\" content=\"Learn how ESD flooring batch testing covers sampling plans, resistance measurements, acceptance criteria, and quality control.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/meettfit.com\/ar\/\u0645\u062f\u0648\u0646\u0629-\u0627\u0644\u0623\u0631\u0636\u064a\u0627\u062a-\u0627\u0644\u0628\u0644\u0627\u0633\u062a\u064a\u0643\u064a\u0629\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/\" \/>\n<meta property=\"og:locale\" content=\"ar_AR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How Is Batch Resistance Sampled for ESD Vinyl Flooring - MF FLOOR\" \/>\n<meta property=\"og:description\" content=\"Learn how ESD flooring batch testing covers sampling plans, resistance measurements, acceptance criteria, and quality control.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/meettfit.com\/ar\/\u0645\u062f\u0648\u0646\u0629-\u0627\u0644\u0623\u0631\u0636\u064a\u0627\u062a-\u0627\u0644\u0628\u0644\u0627\u0633\u062a\u064a\u0643\u064a\u0629\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/\" \/>\n<meta property=\"og:site_name\" content=\"MF FLOOR\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=100079773047357\" \/>\n<meta property=\"article:published_time\" content=\"2026-10-31T07:00:30+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Leo\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u0643\u064f\u062a\u0628 \u0628\u0648\u0627\u0633\u0637\u0629\" \/>\n\t<meta name=\"twitter:data1\" content=\"Leo\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u0648\u0642\u062a \u0627\u0644\u0642\u0631\u0627\u0621\u0629 \u0627\u0644\u0645\u064f\u0642\u062f\u0651\u0631\" \/>\n\t<meta name=\"twitter:data2\" content=\"\u062f\u0642\u064a\u0642\u0629 \u0648\u0627\u062d\u062f\u0629\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/\"},\"author\":{\"name\":\"Leo\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef\"},\"headline\":\"How Is Batch Resistance Sampled for ESD Vinyl Flooring\",\"datePublished\":\"2026-10-31T07:00:30+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/\"},\"wordCount\":2329,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/meettfit.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png\",\"articleSection\":[\"Vinyl Flooring Insights\"],\"inLanguage\":\"ar\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/\",\"url\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/\",\"name\":\"How Is Batch Resistance Sampled for ESD Vinyl Flooring - MF FLOOR\",\"isPartOf\":{\"@id\":\"https:\/\/meettfit.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png\",\"datePublished\":\"2026-10-31T07:00:30+00:00\",\"description\":\"Learn how ESD flooring batch testing covers sampling plans, resistance measurements, acceptance criteria, and quality control.\",\"breadcrumb\":{\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#breadcrumb\"},\"inLanguage\":\"ar\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ar\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage\",\"url\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png\",\"contentUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png\",\"width\":800,\"height\":600,\"caption\":\"Vinyl Flooring (7)\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/meettfit.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How Is Batch Resistance Sampled for ESD Vinyl Flooring\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/meettfit.com\/#website\",\"url\":\"https:\/\/meettfit.com\/\",\"name\":\"MF FLOOR\",\"description\":\"fitness and sports floor China factory\",\"publisher\":{\"@id\":\"https:\/\/meettfit.com\/#organization\"},\"alternateName\":\"MF FLOOR\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/meettfit.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ar\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/meettfit.com\/#organization\",\"name\":\"MF FLOOR\",\"alternateName\":\"MF FLOOR\",\"url\":\"https:\/\/meettfit.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ar\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png\",\"contentUrl\":\"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png\",\"width\":512,\"height\":512,\"caption\":\"MF FLOOR\"},\"image\":{\"@id\":\"https:\/\/meettfit.com\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/profile.php?id=100079773047357\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef\",\"name\":\"Leo\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ar\",\"@id\":\"https:\/\/meettfit.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g\",\"caption\":\"Leo\"},\"url\":\"https:\/\/meettfit.com\/ar\/author\/1659230944qq-com\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How Is Batch Resistance Sampled for ESD Vinyl Flooring - MF FLOOR","description":"Learn how ESD flooring batch testing covers sampling plans, resistance measurements, acceptance criteria, and quality control.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/meettfit.com\/ar\/\u0645\u062f\u0648\u0646\u0629-\u0627\u0644\u0623\u0631\u0636\u064a\u0627\u062a-\u0627\u0644\u0628\u0644\u0627\u0633\u062a\u064a\u0643\u064a\u0629\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/","og_locale":"ar_AR","og_type":"article","og_title":"How Is Batch Resistance Sampled for ESD Vinyl Flooring - MF FLOOR","og_description":"Learn how ESD flooring batch testing covers sampling plans, resistance measurements, acceptance criteria, and quality control.","og_url":"https:\/\/meettfit.com\/ar\/\u0645\u062f\u0648\u0646\u0629-\u0627\u0644\u0623\u0631\u0636\u064a\u0627\u062a-\u0627\u0644\u0628\u0644\u0627\u0633\u062a\u064a\u0643\u064a\u0629\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/","og_site_name":"MF FLOOR","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=100079773047357","article_published_time":"2026-10-31T07:00:30+00:00","og_image":[{"width":800,"height":600,"url":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png","type":"image\/png"}],"author":"Leo","twitter_card":"summary_large_image","twitter_misc":{"\u0643\u064f\u062a\u0628 \u0628\u0648\u0627\u0633\u0637\u0629":"Leo","\u0648\u0642\u062a \u0627\u0644\u0642\u0631\u0627\u0621\u0629 \u0627\u0644\u0645\u064f\u0642\u062f\u0651\u0631":"\u062f\u0642\u064a\u0642\u0629 \u0648\u0627\u062d\u062f\u0629"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#article","isPartOf":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/"},"author":{"name":"Leo","@id":"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef"},"headline":"How Is Batch Resistance Sampled for ESD Vinyl Flooring","datePublished":"2026-10-31T07:00:30+00:00","mainEntityOfPage":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/"},"wordCount":2329,"commentCount":0,"publisher":{"@id":"https:\/\/meettfit.com\/#organization"},"image":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage"},"thumbnailUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png","articleSection":["Vinyl Flooring Insights"],"inLanguage":"ar","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/","url":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/","name":"How Is Batch Resistance Sampled for ESD Vinyl Flooring - MF FLOOR","isPartOf":{"@id":"https:\/\/meettfit.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage"},"image":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage"},"thumbnailUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png","datePublished":"2026-10-31T07:00:30+00:00","description":"Learn how ESD flooring batch testing covers sampling plans, resistance measurements, acceptance criteria, and quality control.","breadcrumb":{"@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#breadcrumb"},"inLanguage":"ar","potentialAction":[{"@type":"ReadAction","target":["https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/"]}]},{"@type":"ImageObject","inLanguage":"ar","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#primaryimage","url":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png","contentUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2026\/10\/Vinyl-Flooring-7-2.png","width":800,"height":600,"caption":"Vinyl Flooring (7)"},{"@type":"BreadcrumbList","@id":"https:\/\/meettfit.com\/pvc-floor-blog\/how-is-batch-resistance-sampled-for-esd-vinyl-flooring\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/meettfit.com\/"},{"@type":"ListItem","position":2,"name":"How Is Batch Resistance Sampled for ESD Vinyl Flooring"}]},{"@type":"WebSite","@id":"https:\/\/meettfit.com\/#website","url":"https:\/\/meettfit.com\/","name":"MF FLOOR","description":"fitness and sports floor China factory","publisher":{"@id":"https:\/\/meettfit.com\/#organization"},"alternateName":"MF FLOOR","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/meettfit.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ar"},{"@type":"Organization","@id":"https:\/\/meettfit.com\/#organization","name":"MF FLOOR","alternateName":"MF FLOOR","url":"https:\/\/meettfit.com\/","logo":{"@type":"ImageObject","inLanguage":"ar","@id":"https:\/\/meettfit.com\/#\/schema\/logo\/image\/","url":"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png","contentUrl":"https:\/\/meettfit.com\/wp-content\/uploads\/2025\/02\/cropped-icon.png","width":512,"height":512,"caption":"MF FLOOR"},"image":{"@id":"https:\/\/meettfit.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=100079773047357"]},{"@type":"Person","@id":"https:\/\/meettfit.com\/#\/schema\/person\/ba93f0ead95f571b725acc83f6544fef","name":"Leo","image":{"@type":"ImageObject","inLanguage":"ar","@id":"https:\/\/meettfit.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/848b16970688cfb2f4cc64e85a2e2233183d3242ed0a21ffa4c859df339031f6?s=96&d=mm&r=g","caption":"Leo"},"url":"https:\/\/meettfit.com\/ar\/author\/1659230944qq-com\/"}]}},"_links":{"self":[{"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/posts\/10764","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/comments?post=10764"}],"version-history":[{"count":1,"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/posts\/10764\/revisions"}],"predecessor-version":[{"id":10775,"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/posts\/10764\/revisions\/10775"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/media\/10772"}],"wp:attachment":[{"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/media?parent=10764"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/categories?post=10764"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/meettfit.com\/ar\/wp-json\/wp\/v2\/tags?post=10764"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}